manualshive.com logo in svg

Sony MINIDISC ZS-M35, Service Manual

Share
Download
Sony MINIDISC ZS-M35 Service Manual Download Page 19

– 19 –

SECTION 4

TEST MODE

Refer to “5. ELECTRICAL ADJUSTMENT” for the test mode of CD section.

4-1. MD SECTION

1. PRECAUTIONS FOR USE OF TEST MODE

• As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc is

stopped before setting and removing it.
Even if the  

Z

  (MD) button is pressed while the disc is rotating during continuous playback, continuous recording, etc., the disc will not

stop rotating.
Therefore, it will be ejected while rotating.
Be sure to press the  

Z

  (MD) button after pressing the 

[REC/REC MODE]

 button and the rotation of disc is stopped.

1-1. Recording laser emission mode and operating buttons

• Continuous recording mode (CREC MODE)
• Laser power check mode (LDPWR CHECK)
• Laser power adjustment mode (LDPWR ADJUST)
• When pressing the 

[REC]

 button.

2. SETTING THE TEST MODE

1. Set to standby state.
2. Press the buttons 

[SOUND]

 and 

[EDIT]

 and  

.

  (TUNE –) at the same time and then release them soon (within 100m sec). The TEST

MODE is entered.

3. RELEASING THE TEST MODE

Hold down the 

[OPERATE]

 button and remove the power cord to reset the set.

4. BASIC OPERATIONS OF THE TEST MODE

All operations are performed with the following buttons:  

u

  (MD),  

x

  (MD), 

[RADIO/BAND]

, and 

[REC/REC MODE]

.

The functions of these buttons are as follows.

Function name

Function

u

 (MD)

Proceeds the parameter/mode change.

x

 (MD)

Returns to the parameter/mode change.

RADIO/BAND

Goes ahead. Determines the setting/selection.

REC/REC MODE

Suspends.

Summary of Contents for MINIDISC ZS-M35





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands