– 7 –
SECTION 2
GENERAL
This section is extracted
from instruction manual.
Playing a CD
For hookup instructions, see pages 64 - 67.
1
Press
Z
PUSH OPEN/CLOSE
down to open the CD
compartment and place
the
CD
on the CD compartment.
2
Close the lid of the CD
compartment.
3
Press CD
u
(CD
N
on the
remote).
The player turns on (direct
power-on) and the player plays
all the tracks once.
With the label side up
Display
Playing
time
Track
number
1, 2
3
Use these buttons for additional operations
To
Press
adjust the volume
, –
(VOL +, – on the remote)
stop playback
CD
x
pause playback
CD
u
(CD
X
on the
remote)
Press the button again to
resume play after pause.
go to the next track
>
go back to the previous track
.
remove the CD
Z
PUSH OPEN/CLOSE
turn on/off the player
O P E R AT E
Tip
Next time you want to
listen to a CD, just press
CD
u
. The
player
turns on automatically
and starts playing the
CD.
VOLUME –, +
CD
u
.
,
>
Z
PUSH
OPEN/CLOSE
CD
x
OPERATE
Recording a whole CD
(Synchronized recording)
Display
3
4
2
1
For hookup instructions, see pages
64 - 67.
1
Insert a recordable MD (direct
power-on).
2
Press
PUSH
OPEN/CLOSE
and place the CD on the CD
compartment.
Press
PUSH
OPEN/CLOSE
again to close the CD
compartment.
3
Press CD
x
.
With the label side up
With the label
side up
After “TOC Reading” is
displayed, the disc name
will be displayed if it is
labelled.
Insert in the direction of
arrow
5
Z
Z
To
Press
stop recording
MD
x
or CD
x
turn on/off the player
O P E R AT E
If “CD>MD OK?” alternates with time display
There is not enough space on the MD to record the whole
CD.
If it is all right to record as much as possible and cancel
recording of some tracks, press YES•ENTER. To stop
recording, press NO•CANCEL.
If any other messages are displayed, see page 80.
Track number
of MD
YES
ENTER
OPERATE
NO
CANCEL
4
To record at high speed, press HIGH SPEED.
The indicator lights up.
To record at normal speed, skip this step.
5
Press SYNCHRO REC CD
N
MD.
The player starts recording
automatically.
If the MD has any previous
recording, recording will be
made from the last recorded
position.
Remaining
recording
time of MD
Use these buttons for additional operations
CD MD
x
Notes
•
After you
stop recording, do not
disconnect the mains
lead or move the
player while “TOC
EDIT” is flashing in the
display.
If you do so,
recording may not be
done properly.
• When you record a
whole CD, you cannot
pause recording.
Tips
• Adjusting the volume or
the audio emphasis
(page 56) will not affect
the recording level.
Keep the volume at a
moderate level so as to
prevent the sound from
skipping.
• To record over the
previous recording, see
page 40.
• Once the clock is set, the
recording date and time
are stamped
automatically (page 57).
• You can label an MD or a
track during recording
(page 51).
MD
x
Summary of Contents for MINIDISC ZS-M35
Page 102: ... 130 ZS M35 MEMO ...