Sony MINIDISC ZS-M35, Service Manual

Page: 8 / 124

– 8 –
Playing an MD
For hookup instructions,
see pages 64 - 67.
1
Insert the MD (direct power-on).
2
Press MD
u
(MD N on the
remote).
The player plays all the tracks
once.
With the label
side up
Display
Playing time
Track number
1 2
Insert in the direction of
the arrow
After “TOC Reading” is
displayed, the disc name
will be displayed if it is
labelled.
m
Track name is displayed
To Press
adjust the volume , –
(VOL +, – on the remote)
stop playback MD x
pause playback MD u (MD X on the
remote)
Press the button again
to
resume play after pause.
go to the next track >
go back to the previous track .
remove the MD Z
turn on/off the player O P E R AT E
Tip
Next time you want to
listen to a MD, just press
MD
u . The player
turns on automatically
and starts playing the
MD.
VOLUME –, +
Z
MD x
OPERATE
MD u
.
. >
Use these buttons for additional operations
Listening to the radio
For hookup instructions, see pages 64 - 67.
1
Press RADIO BAND until the
band you want appears in the
display (direct power-on).
2
Hold down TUNE + or TUNE –
until the frequency digits begin to
change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
If you can’t tune in a station,
press TUNE + or TUNE –
repeatedly to
change the
frequency step by step.
1 2
Display
“FM1”, “FM2”, “MW” or
“LW” appears
Indicates an FM stereo
broadcast
Tips
• The “FM1” and “FM2”
bands have the same
functions. You can store
the stations you want
separately in “FM1” and
“FM2” (page 22).
• If the FM broadcast is
noisy, press MONO/
ST•REPEAT (MODE on
the remote) until
“Mono” appears in the
display and radio will
play in monaural.
• N ext time you want to
listen to the radio, just
press RADIO BAND.
The player turns on
automatically and starts
playing the previous
station.
To Press
adjust the volume , –
(VOL +, – on the remote)
turn on/off the radio O P E R AT E
To improve broadcast reception
FM:
Set the FM ANTENNA SELECTOR at the rear of the
player to “
” (telescopic aerial).
Reorient the aerial for FM.
MW/LW:
Keep the MW/LW loop aerial as far as possible from
the player and reorient it.
If the broadcast is still noisy, connect the external
aerial (page 67).
VOLUME –, +
MONO/ST
REPEAT
OPERATE
Use these buttons for additional operations