![background image](http://html.mh-extra.com/html/sony/mhc-v700/mhc-v700_operating-instructions-manual_1330117016.webp)
Chapter 2: the Video CD/CD-G/CD Player
EN
16
➔
continued
To check the contents of the
program (from remote only)
Press CHECK before starting playback.
Each time you press CHECK the next step
appears in the display.
When the last step “CHECK END” is
displayed and the normal display returns.
To change the contents of the
program
To
Press
Erase a specific
CHECK repeatedly so
track
that the number of the
track lights up, and
press CLEAR
Erase a track from
CLEAR in stop mode
the end
Add a track at
1.Turn the JOG dial
the end of the
until the desired
program
track number
appears in the
display.
2.Press ENTER/NEXT.
Erase the entire
p
once in stop mode
program
and twice while
playing
Notes
•The program you made still remains in
the CD player, so you can play the same
program again.
•If “--.--” appears instead of the total
playing time during programming, this
means you have programmed a track
numbered greater than 20, or the total
playing time has exceeded 100 minutes.
Playing Tracks
Repeatedly
(repeat play)
The repeat play function repeats a single
CD or all CDs in normal play, shuffle play
and program play.
Use the buttons on the unit to do this
operation.
Repeating all the tracks
1
Press REPEAT repeatedly until
“REPEAT” appears in the display.
2
Press
·∏
.
To cancel repeat play
Press REPEAT repeatedly until “REPEAT”
or “REPEAT 1” disappears from the
display.
Note
You can not repeat a single track during
shuffle or program play.
To
Repeat all the
tracks on the
current CD
Repeat all the
tracks on all CDs
Repeat only one
track
Press
1/ALL DISCS
repeatedly until “1
DISC” appears in the
display.
1/ALL DISCS
repeatedly until “ALL
DISCS” appears in the
display.
REPEAT repeatedly
until “REPEAT 1”
appears in the display
while playing the track
you want to repeat.
POWER
m
ON
REPEAT
1/ALL DISCS