— 32 —
31
Playing MDs
Playing Tracks Repeatedly
(Repeat Play)
You can play an entire MD repeatedly. This function can
be used with Shuffle Play to repeat all the tracks in random
order, or with Program Play to repeat all the tracks in the
program. You can also repeat a specific track or portion
within a track.
Repeat play cannot be performed during Multi-access play
(page 34).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
M.ACCESS
CONTINUE
SHUFFLE
PROGRAM
NAME
CHAR
RM-DR1J
NUM
>25
AMS
MENU / NO
YES
A -B
REPEATE
Note
If you turn off the recorder or disconnect the AC power
cord, the recorder will store the last setting of the repeat
play (“Repeat All” or “Repeat 1”) and recall it the next
time you turn on the recorder. However, A - B Repeat is
canceled.
Repeating all the tracks on the MD (Repeat
All Play)
Z
All tracks are repeated.
Press REPEAT until REPEAT lights up at the display
window.
When you play an MD, the recorder repeats the tracks as
follows:
When the play mode is
The recorder repeats
Normal play (page 27)
All the tracks in sequence
Shuffle play (page 32)
All the tracks in random order
Program Play (page 33)
All the tracks in the program
in sequence
To resume normal play
Press REPEAT until “REPEAT” at the display window
turns off.
z
You can also set Repeat All Play in the Setup Menu of the
recorder.
1
Press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS to select “Repeat Mode,” then press AMS or
YES.
3
Turn AMS to select “Repeat ALL,” then press AMS or
YES.
4
Press MENU/NO.
Repeating the current track
(Repeat 1 Play)
Z
The current track is repeated.
Press REPEAT until “Repeat 1” appears at the display
window.
When you play an MD, Repeat 1 Play starts.
To resume normal play
Press REPEAT until “REPEAT 1” at the display window
turns off.
z
You can also set Repeat 1 Play in the Setup Menu of the
recorder.
1
Press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS to select “Repeat Mode,” then press AMS or
YES.
3
Turn AMS to select “Repeat 1,” then press AMS or YES.
4
Press MENU/NO.
32
Playing MDs
Repeating a specitic portion within a track
(Repeat A-B Play)
Z
You can specify a portion within a track to play repeatedly.
This is convenient to study language or memorize words.
Note that the portion that you specity must be within the
bourdaries of a single track.
1
While the recorder is playing, press A
↔
B at the
starting point (point A) of the portion to be played
repeatedly.
“REPEAT A-B” lights up.
2
Continue playing the track or use
M
to locate the
ending point (point B) of the portion to be played
repeatedly, then press A
↔
B again.
The specified portion repeats.
To stop Repeat A-B Play
Press REPEAT or
x
.
To set a new starting point and ending point
during Repeat A-B Play
Specify the starting point and ending point by the same
operation.
z
You can also set A-B Repeat in the Setup Menu of the
recorder.
1
Press MENU/NO during play until “Setup Menu”
appears in the display.
2
Turn AMS until “Repeat Mode” appears at the display
window, then press AMS.
3
Turn AMS until “A-B Repeat,” then press AMS.
The display window returns to the track number and
time display (normal display) during play, then
“REPEAT A-B” lights up and “A-B” flashes.
4
Press AMS at the starting point (point A) of a portion to
be played repeatedly.
5
Continue playing the track or use
M
to locate the
ending point (point B) of the portion to be played
repeatedly, then press AMS again.
Note
A-B Repeat does not work during Shuffle Play or Multi-
access Play.
Playing Tracks in Random
Order (Shuffle Play)
Z
When you select Shuffle Play, the recorder plays all the
tracks on the MD in random order.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
M.ACCESS
CONTINUE
SHUFFLE
PROGRAM
NAME
CHAR
RM-DR1J
NUM
>25
SHUFFLE
/
AMS
MENU / NO
YES
1
Press SHUFFLE while the recorder is stopped.
“SHUFFLE” lights up at the display window.
2
Press
H
.
Shuffle Play starts.
To resume normal play from Shuffle Play
Press CONTINUE while the recorder is stopped.
“SHUFFLE” at the display window turns off.
z
You can locate tracks during Shuffle Play
Turn AMS (or press
.
/
>
). To locate the next
track or a later track to be played, turn AMS clockwise
(or press
.
/
>
). To locate the beginning of the
current track, turn AMS counterclockwise (or press
.
). Note that you can’t locate and play the tracks
that have already been played once.
z
You can also set Shuffle Play in the Setup Menu of the
recorder.
1
Press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS to select “Play Mode,” then press AMS or
YES.
3
Turn AMS to select “Shuffle,” then press AMS or YES.
4
Press MENU/NO.
33
Playing MDs
Creating Your Own Program
(Program Play)
You can pick out the tracks that you like and specify the
playback order in a program containing up to 25 tracks.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
M.ACCESS
CONTINUE
SHUFFLE
PROGRAM
NAME
CHAR
RM-DR1J
NUM
>25
PROGRAM
CLEAR
>25
CONTINUE
NUMBER BUTTONS
DISPLAY
AMS
CLEAR
MENU / NO
YES
MENU / NO
/
/
/
Programming the tracks
1
While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until
“Program?” of “Setup Menu” appears, then press
AMS or YES.
3
Turn AMS (or press
.
/
>
repeatedly) until the
track number you want to add to the program
appears, then press AMS (or use the number
button(s) to enter the track directly).
3 S 1 2 m 2 7 s
/ 6 8 1 0 0 /
Programmed track number
and track order
Number of
programmed tracks
Total time of
programmed play
If you entered the wrong track number
Press
m
repeatedly until the wrong track number
flashes, then do step 3 above again or press CLEAR to
erase the track number.
To enter a track number over 26
Z
Use >25. For details, see page 29.
4
Repeat step 3 to enter other tracks.
The entered track is added to the location where the
“0” flashes.
Each time you enter a track, the total program time
appears in the display.
5
Press YES.
“Complete!” appears and the program is completed.
6
Turn AMS (or press
.
/
>
repeatedly) to select
“Play Mode,” then press AMS or YES.
7
Turn AMS (or press
.
/
>
repeatedly) to select
“Program,” then press AMS or YES (or press
PROGRAM after step 5 for the remote).
“PROGRAM” lights up at the display window.
8
Press
7
(
H
).
Program replay starts.
To stop Program Play
Press
x
.
To resume normal play
While the recorder is stopped, press CONTINUE in the
remote. “PROGRAM” at the display window turns off.
z
The program remains even after Program Play ends or is
stopped
Press
7
to play from the beginning of the program
again. If the play is stopped, the program will not be
lost.
Notes:
• If the MD is ejected, the program will be lost.
• The display shows “— m — s” when the total playing
time of the program exceeds 255 minutes.
• “ProgramFull” appears when you try to program 26 th
track.
• The set program will be lost when you try record or edit
operation.
Checking the order of tracks in the
program
While the recorder is stopped and “PROGRAM” lights
up, press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly.
The first several tracks in the program appear in the
display.
z
To see the rest of the program
After the first several tracks in the program appear by
the above procedure, turn AMS clockwise (or press
repeatedly).
34
Playing MDs
Changing the contents of the program
While the recorder is stopped and “PROGRAM” lights up,
do steps 1 and 2 of “Programming the tracks” on page 33,
followed by one of the procedures below.
To
Do the following:
Erase a track
Press
m
/
M
repeatedly until the
number of the unwanted track
flashes, then press CLEAR.
Erase all tracks
Press CLEAR repeatedly until all the
track numbers disappear.
Add a track at the
Press
m
repeatedly until “0” flashes
beginning of the
before the first track number, then do
program
steps 3 to 5 of “Programming the
tracks” on page 33.
Add a track in the
Press
m
/
M
repeatedly until the
middle of the
track number which will precede the
program
new track flashes. Press AMS to
display flashing “0,” then do steps 3
to 5 of “Programming the tracks” on
page 33.
Add a track to the
Press
M
repeatedly until “0” flashes
end of the program after the last track number, then do
steps 3 to 5 of “Programming the
tracks” on page 33.
Replace a track
Press
m
/
M
repeatedly until the
number of the track to be changed
flashes, then do steps 3 to 5 of
“Programming the tracks” on page
33.
Storing the Located Track to
Start Play Instantaneously
(Multi-access Play)
The begining of track is prestored in memory and play
starts instantaneously when the track is selected.
Up to 10 tracks can be stored in memory.
The function below cannot work in Multi-access.
Multi-access is based on single play. This function is used
to instantaneously play the track specified by the Number
key on the remote (track selected by AMS of the recorder).
Therefore, Record, Variable speed play,
m
/
M
(backward/forward), Repeat Play, Auto Pause, Auto Cue,
Mark, and Locate function are invalid.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
M.ACCESS
CONTINUE
SHUFFLE
PROGRAM
NAME
CHAR
RM-DR1J
NUM
>25
CLEAR
>25
CONTINUE
NUMBER BUTTONS
M.ACCESS
AMS
CLEAR
MENU / NO
YES
MENU / NO
YES
/
/
/
Programming access play tracks
1
While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) to select
“M.Access?” then press AMS or YES.
The display window displays the access play track in
the program.
0 m 0 0 s
N o 1 - - 0 Tr
3
Turn AMS (or press
.
/
>
repeatedly) to select a
track number you want to store, then press AMS or
YES. (Or press the Number buttons to directly enter
the track number.)
3 m 2 8 s
N o 1 - - 6
Programmed track order
Programmed track number
Time of playing the programmed track
Tr
