Sony MDR-10RBT, User Manual

Page: 60 / 77

Help Guide
MDR-10RBT Top > Multi point connection > Multi point connection >
Getting Started
BLUETOOTH
One-touch
connection (NFC)
Music
Phone calls
Multi point
connection
Troubleshooting
Important
information
Contents list
Connecting the headset with a music
player and a smartphone (mobile
phone)
To call using a BLUETOOTH smartphone or mobile phone while
listening to music played on another BLUETOOTH compatible music
player, the headset needs to be connected with each device with a
BLUETOOTH connection.
1.
Pair the headset with a BLUETOOTH music player and a
smartphone (mobile phone), respectively.
2.
Make an A2DP BLUETOOTH connection between the headset
and the BLUETOOTH music player.
3.
Make an HFP or HSP BLUETOOTH connection between the
headset and the BLUETOOTH smartphone or mobile phone.
Note
If you have previously connected this BLUETOOTH device, an
HFP or HSP connection is made automatically when you turn on
the headset. At the same time, an A2DP connection may also be
made automatically. If this happens, disconnect the headset from
the smartphone or mobile phone once using the phone, then
connect the devices again by repeating the process from step 2.
To call during playback
Make a phone call by operating the smartphone or mobile phone.
If no dial tone is heard via the headset, switch the call device to
the headset using your smartphone or mobile phone. With an
HFP connection, you can do this by pressing the button on the
headset for about 2 seconds.
To receive a call
When an incoming call arrives, the music playback pauses, and a ring
tone is heard via the headset.
Press the button on the headset and talk using the microphone.
To end a call, press the button on the headset again to switch
back to music playback.
60