Sony MDR-10RBT, User Manual

Page: 37 / 77

device, input “0000.”
A Passkey may be called a “Passcode,” a “PIN code,” a “PIN
number,” or a “Password.”
4.
Make the BLUETOOTH connection from the BLUETOOTH
device.
Depending on the BLUETOOTH device, the headset may be
connected with the device automatically as soon as they are
paired.
Tip
To delete all pairing information, see “ What can I do to solve a
problem? ”
Notes
For details, refer to the manual supplied with the BLUETOOTH
device.
When pairing with a BLUETOOTH device that cannot display a list
of detected devices or that has no display, you may pair the device
by setting both the headset and the BLUETOOTH device to
pairing mode. At this time, if passkey is set besides “0000” on the
BLUETOOTH device, pairing cannot be done with the headset.
Once BLUETOOTH devices are paired, there is no need for
pairing again, except in the following cases:
Pairing information is deleted after repair, etc.
The headset is paired with 9 or more devices. The headset can
be paired with up to 8 devices; if a new device is paired after 8
devices have been paired, the device whose latest connection
time is the oldest among the 8 paired devices is replaced by the
new one.
When recognition of the headset by the device to be connected
is deleted.
The headset is initialized. All pairing information is deleted.
Connecting with a paired BLUETOOTH device
© 2013 Sony Corporation
37