Sony MDR-10RBT, User Manual

Page: 53 / 77

To select the “Priority on sound quality” mode
When the headset is in the “Standard” mode, turn it on while holding
the button down. The “Priority on sound quality” mode is
selected.
From the “Priority on stable connection” mode, turn on the headset
while holding the button down. Turn off the headset once,
then turn it on while holding the button down again.
To select the “Priority on stable connection” mode
When the headset is in the “Standard” mode, turn it on while holding
the VOLUME – button down. The “Priority on stable connection” mode
is selected.
From the “Priority on sound quality” mode, turn on the headset while
holding the VOLUME – button down. Turn off the headset once, then
turn it on while holding the VOLUME – button down again.
Notes
The playback time may become shorter, depending on the sound
quality and the conditions under which you are using the headset.
Depending on the ambient conditions in the area where you are
using the headset, intermittent sound may still occur, even if the
“Priority on stable connection” mode is selected.
© 2013 Sony Corporation
53