manualshive.com logo in svg

Sony MCX-500, Operating Instructions Manual, Page: 30 / 75

Share
Download
Sony MCX-500 Operating Instructions Manual Download Page 30

000

Chapter 3: Basic Operations: Switching Videos

30

Previewing videos before switching

Preview the video to be output next as the PGM output in the multi-viewer before switching to it.

Use the buttons in rows A and B.

The buttons in row B are used to select the video to output next 

as the PGM output.

Check that the BKGD button is lit beforehand.

If the button is unlit, press and light it.

Press this button to switch the 

video.

9 INPUT TERMINALS

VIDEO

SDI

VIDEO

SDI

HDMI

SDI

HDMI

SDI

TITLE

INPUT

TALLY

MULTI  VIEWER

PGM

LINE

OUTPUT

1 

Check the assigned videos in the [INPUT] viewer of the multi-viewer.

For details on changing the assigned videos, see “Assigning Inputs” (page 25).

2 

Press the button for the video you want to output next as the PGM output.

Video to be output next as the PGM output

The selected video appears in the [NEXT] viewer of the multi-viewer.

A frame indicating selection as the NEXT output appears around the video selected in row B.

3 

Press the CUT button.

The video switches.

Summary of Contents for MCX-500












































































Reviews:

No comments