1-7 (E)
MAV-555
4.
Remove the eight screws on both sides of the unit.
Attach the inner rails to the unit using the eight screws
supplied.
5.
Remove the four screws on both sides of the unit.
Attach the rack angles to the unit using the four screws
supplied.
Rack angle
PSW4
x
16
Rack angle
PSW
4
x
16
B4
x
8
B4
x
8
Inner rail
Inner rail
1-6. Rack Mounting
Attaching the outer rails to the rack
1.
Attach the brackets to the outer rails
1
with plate nuts
(long) and the screws temporarily as shown.
n
Attach the brackets such that the screw hole of the
outer rail
1
becomes visible when the outer rail
2
is
moved to the front and rear.
2.
Adjust the outer rail position so that the distance
between the rack angle mounting surface and the outer
rail
1
tip becomes 50 to 55 mm as shown when the
outer rail is attached to the rack. Tighten the screws
of the bracket that were temporary tightened in step 1.
Plate nut
Plate nut
Bracket
Bracket
Outer rail
1
Outer rail
2
B4
x
8
B4
x
8
50 to 55 mm
Rack angle
mounting surface
Rack
Outer rail
1
