1-8 (E)
MAV-555
Wide type
3.
Attach the brackets to the rack with plate nuts (short),
hexagon head cap bolts and flat washers.
c
Be sure to mount the unit with at least two persons to avoid
back injuries and prevent the unit from falling.
Universal type
Hexagon
head cap
screws
Flat washer
Flat washer
Plate nut (short)
Bracket
Hexagon
head cap
screws
Flat washer
Flat washer
Plate nut (short)
Bracket
12.7
12.7
Installing the unit in the rack
1.
While pressing down the stoppers of the inner rails, align
and insert the unit into the outer rails. Confirm that the
unit can be smoothly moved to the front and rear. Then
tighten securely the hexagon head cap screws that were
temporarily tightened to fix the bracket.
2.
Attach the rack angles to the rack with screws and
ornamental washers.
c
Secure the rack angles to the rack with the screws. Other-
wise the unit may slide and fall off, resulting in injury.
When inserting the unit into the rack,
push in the sliding bearing deep
inside as shown.
Inner rail
Sliding bearing
Outer rail
2
Inner rail
Stopper
1-6. Rack Mounting
Rack angle
RK5
x
14
RK5
x
14
Ornamental
washers
Ornamental washers
