background image

4

Safety Information

Televisions operate on extremely high voltages. To prevent fire or electric shock, please
follow the safety procedures indicated below. For your own safety, never open the cabinet.
Refer servicing to qualified personnel only.

For General Safety

• Do not expose the TV set to rain or moisture.
• Do not remove the rear cover.

For Safe Installation

• Do not install the TV in hot, humid or excessively dusty places.
• Do not block or cover the ventilation openings. For ventilation, leave

a space of at least 10 cm all around the set.

• Do not install the TV where it may be exposed to mechanical vibrations.

For Safe Operation

• Do not operate the TV set on anything other than a 220-240V AC, 50Hz

supply.

• Unplug the TV if any liquid or solid objects fall in through the

ventilation slots. Have it checked immediately.

• Do not disconnect the TV by pulling on the power cable.  Disconnect by

removing the mains plug.

Caution

Do not knock or rub on the tube face with sharp or hard objects.  Remove finger
prints only with a soft cloth dampened with glass cleaner.  Do not use any abrasive
cleaners!

Safety First

Summary of Contents for KV-28DS65U







































Reviews: