15
Setting up Dolby ProLogic
Additional TV Features
Before listening to Dolby Surround sound, you can adapt the Dolby features to suit your own
taste. It is normal to set up the levels and modes of the speakers only when installing the TV
and the speakers or when changing the position of the speakers.
1
Press the MENU button on the remote control to display the
menu on the TV screen.
2
Move the OK button on the remote control DOWN to select the
symbol on the TV screen then move to RIGHT to enter the
‘PRESET‘ menu.
3
Move the OK button DOWN to select ‘Installation‘ then move
the OK button RIGHT to enter the ‘INSTALLATION‘ menu.
4
Move the OK button DOWN to select ‘Dolby ProLogic Setup‘
then move RIGHT to enter the ‘DOLBY PROLOGIC SETUP‘
menu.
5
Move the OK button UP or DOWN to select ‘Level Settings‘ then
move RIGHT to confirm.
6
Select Left (left speaker), Centre (centre speaker), Right (right
speaker) or Surround (surround speakers)by moving the OK
button UP or DOWN then move the OK button RIGHT to store.
7
Adjust the level by moving the OK button RIGHT or LEFT.
8
After you have adjusted the level, press the OK button to store the
new level.
9
Repeat steps 6 to 8 if you wish to adjust the sound levels of the
other speakers (from your sitting position the sound output
from all speakers should balance).
10
Move the OK button LEFT.
11
Select ‘Speaker mode‘ by moving the OK button DOWN then
move the OK button RIGHT to enter.
12
Push the OK button repeatedly DOWN to select:
Normal
–
all speakers are activated
3 Wide
–
surround speakers are not used, centre
speaker carries full frequency response
3 Normal –
surround speakers are not used
Wide
–
wider bandwidth for centre speaker
Phantom –
centre speaker is not used
Press the OK button to store your choice.
13
Select ’Delay Time’ by moving the OK button DOWN then
move RIGHT to enter. Adjust the delay time of the surround
speakers by moving the OK button UP or DOWN (e.g 20 ms
for standard rooms, 30 ms for small rooms)
15 ms
n
20 ms
n
25 ms
n
30 ms
Press the OK button to store your choice.
14
Select ’Auto Surround’ by moving the OK button DOWN then
move RIGHT to enter.
Move the OK button DOWN to select:
On -
When receiving a Dolby Surround encoded
programme, the TV switches automatically to Dolby
Surround sound (depending on availability of service
by broadcaster).
Off -
normal
Press the OK button to store your choice.
15
Press the MENU button on the remote control to remove the
menu from the TV screen.
AV Preset
Dolby ProLogic Setup
Picture Rotation
Digital Subtitles
INSTALLATION
Further Prog. Preset
Left
Centre
Right
Surround
DOLBY PROLOGIC SETUP
Level Settings
Speaker Mode [Normal]
Delay Time [20 ms ]
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
Auto Surround [off]
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
Screen Position
SCREEN MODE
Screen Mode
[zoom ]
[ 0 ]
Strobe
Auto 16:9
Correction
[on]
[off]
Screen Position
SCREEN MODE
Screen Mode
[zoom ]
[ 0 ]
Strobe
Auto 16:9
Correction
[on]
[off]
