31
Additional Information
GB
Remote Control Configuration for VCR/DVD
This remote control is set by default to operate basic functions of this Sony TV, Sony DVD and
most Sony VCRs when batteries are initially installed. To control other VCRs and DVDs of other
major brands and certain Sony VCR models, please complete the following steps:
1
Press the Media Selector button on the remote control repeatedly
until the required VCR or DVD green light is lit.
If Media Selector is in the TV position, code numbers will not
be stored.
2
Before the green light goes out, press and hold the yellow button for
approximately 6 seconds until the green light starts flashing.
3
Whilst the green light is flashing, enter all three digits of the code for
your brand using the number buttons on the remote control.
If your selected code is entered correctly, all three green lights
will be lit momentarily.
4
Turn on your VCR or DVD and check that the main functions work.
VCR Brand List
DVD Brand List
Brand Code
Brand
Code
SONY (VHS)
301, 302, 303, 308, 309
SONY
001
SONY (BETA)
303, 307, 310
AIWA
021
SONY (DV)
304, 305, 306
DENON
018, 027, 020, 002
AIWA
325, 331, 351
GRUNDIG
009, 028, 023, 024, 016, 003
AKAI
326, 329, 330
HITACHI
025, 026, 015, 004
DAEWOO
342, 343
JVC
006, 017
GRUNDIG
358, 355, 360, 361, 320, 351
KENWOOD
008
HITACHI
327, 333, 334
LG
015, 014
JVC
314, 315, 322, 344, 352, 353,
LOEWE
009, 028, 023, 024, 016, 003
354, 348, 349
MATSUI
013, 016
LG
332, 338
ONKYO
022
LOEWE
358, 355, 360, 361, 320, 351
PANASONIC
018, 027, 020, 002
MATSUI
356, 357
PHILIPS
009, 028, 023, 024, 016, 003
ORION
328
PIONEER
004
PANASONIC
321, 323
SAMSUNG
011, 014
PHILIPS
311, 312, 313, 316, 317, 318, 358, 359 SANYO
007
SAMSUNG
339, 340, 341, 345
SHARP
019, 027
SANYO
335, 336
THOMSON
012
SHARP
324
TOSHIBA
003
THOMSON
319, 350
YAMAHA
018, 027, 020, 002
TOSHIBA
337
• Before you start, look up the 3 digit code for your brand of DVD or VCR from the list
below. On those brands that have more than one code, enter the first code number.
• Sony will endeavour to update the software according to market changes. Therefore,
please refer to code table included with the remote control for latest code set.
• If your device is not working or some of the functions do not
work please check you entered the correct code set or try the
next code listed against the brand.
• Your brand codes may be lost if weak batteries are not
replaced within a few minutes. To reset your DVD or VCR
code number please repeat the above steps. A small label is
attached inside the battery door to allow you to record your
brand codes.
• Not all brands are covered and not all models of every brand
may be covered.
/
TV
VIDEO
OK
DVD
VCR
1
2
3
4
5
6
7
8
9
0
PROG
TV
MENU
REC
2
1
3
