14
Menu System
Colour
Press
/
to decrease colour intensity.
Press
/
to increase colour intensity.
Colour
cannot be adjusted for the RGB input.
Sharpness
Press
/
to soften the picture.
Press
/
to sharpen the picture.
NR
(Noise
Reduction)
Off/Low/Mid/High
Select to reduce the noise level of all connected equipment. It is
most effective on the signal from the VHF/UHF jack.
You cannot adjust
NR
(Noise Reduction) for equipment connected to the RGB
input.
Dynamic Pict
On/Off
Select to enhance the picture contrast.
Colour Tone
Cool/Normal/Warm/User1/User2/User3
Select to give bright colours a red tint (Setting is variable from
Cool
to
Warm
).
Select
User1
,
User2
, or
User3
to customise the
Colour Tone
by
adjusting
Red Gain
,
Green Gain
, and
Blue Gain
(tint), and store
them in memory.
Name Set:
Select to name your personal settings. Press
/
/
/
to select the letter, then press
OK
. Finally press
/
/
or
to select the word “End” on the
screen and press
OK
to store.
• To correct the letter, select
on the screen to go
back and press
OK
.
• For a blank, select
on the screen and press
OK
.
Colour Correct
On/Off
Select to emphasise reds and blues.
Colour Correct
cannot be adjusted for the RGB input.
Gamma Correct
High/Mid/Low
Select to adjust the balance between bright and dark areas of the
picture.
Reset
Cancel/OK
Select
OK
to reset the picture to the factory preset levels.
Each option cannot be adjusted when
Mode
is set to
Live
or
Standard
.
