30
Additional Information
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated on page 28.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the
button repeatedly until the
correct input symbol appears on the screen.
4
Press the
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket and select
4 or
4 input signal using the
instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select
“Dual Sound” “A” on the sound menu screen.
Symbol
Input Signals
1 or
2 • Audio / video input signal through the Scart connector
A
.
• RGB input signal through the Scart connector
A
. This symbol appears only if
a RGB source has been connected.
3
• Audio / video input signal through the Scart connector
B
.
3
• S Video input signal through the Scart connector
B
.
4
• Video input signal through the phono socket
D
and Audio input signal
through
C
.
4
• S Video input signal through the S Video input jack
E
and Audio signal
through
C
.
5
• RGB input signal through the Y/G, P
B
/C
B
/B, P
R
/C
R
/R jacks and HD, VD
jacks
H
, and Audio input signal through
G
.
• If your equipment is connected to the Scart connector
3/
, or
4/
4, or
5 jacks, select the input signal format for the connected equipment by using “AV3
Input,” “AV4 Input,” or “AV5 Input” option in the “Features” menu (page 20).
• If your equipment is connected to the
5 jacks and outputs an RGB signal, select
RGB Mode
in the “Features” menu (page 20).
S
S
S
S
S
