Ad
minis
tra
ting t
he Camer
a
Network Menu — Configuring the Network
33
RTSP multicast video port number 1, 2, 3, 4, 5
Specify the H.264 video transmission port number used
for RTSP multicast streaming. The default setting is
61000, 63000, 65000, 65010, or 65020. Specify an even
number from 1024 to 65534. Two port numbers (the
number specified here and an odd number with 1 added
to the specified number) are actually used for video data
communication and control.
The settings for Image 1, Image 2, Image 3, Image 4,
and Image 5 apply to Video port number 1, 2, 3, 4, and
5 respectively.
RTSP multicast audio port number
Specify the audio transmission port number used for
RTSP multicast streaming. The default setting is 59000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are actually used
for audio data communication and control.
RTSP setting
Set the RTSP setting which cannot be set in the Unicast
streaming setting and Multicast streaming.
RTSP port number
Set the port number used for RTSP streaming. The
default setting is 554.
If you change the setting, the RTSP server will be
rebooted.
RTSP time out
Specify the time out time of the Keep-Alive command
by RTSP streaming. You can set the time out from
0
second to
600
seconds.
At the
0
setting, time out of the Keep-Alive command is
not available.
Network Menu
— Configuring the Network
When you click
in the Administrator menu, the
Network menu appears.
Use this menu to configure the network to connect the
camera and the computer.
Network Tab
This section provides the menus for connecting the
camera through the network cable.
Status
MAC address
Displays the MAC address of the camera.
Ethernet status
Displays the current transmission rate.
Network
