Ad
minis
tra
ting t
he Camer
a
Video / Audio Menu — Setting the Camera Image and Audio
28
Intelligent cropping Tab
Function to crop the area of interest from a full image.
You can monitor the the area of interest with a high-
quality image with less bit rate by providing a full image
and area of interest image cropped from 4K resolution.
This option is available when
Intelligent cropping
(Full HD)
and
Intelligent cropping (VGA)
are selected
for output mode (System > Installation tab)
Image
If the output mode is set to
Intelligent cropping (Full
HD)
, 2 to 3 are selectable.
If the output mode is set to
Intelligent cropping (VGA)
,
2 to 5 are selectable.
Note
Enable each image in the Video codec tab.
Mode
Select between manual setting (
Static
) and moving
object tracking (
Dynamic
).
Static
: Crop the area which is set manually. Adjust the
fixing position in the preview screen.
Dynamic
: Waits at the home position until the moving
object is detected. After detecting the moving object
in the area, the cropping area will move
automatically.
Adjust the home position in the preview screen.
Note
To select the
Dynamic
, perform the motion detection
settings in advance.
Tracking monitoring range
Set the Trap area to
Specific
or
Full
.
Timeout of lost tracking
Select the time duration to wait and search moving
objects after the moving object disappears from the
view, and restart tracking.
Intelligent coding Tab
Assigns bit rate by partially lowering compressibility of
the full image. Ensuring large amount of information
enables transferring of images which include areas of
interest with high quality.
This option is available when
Evidence shot
,
4K 25fps/
4K 30fps
, and
4K Multi streaming
are selected for
output mode (System > Installation tab)
No.
Selectable values are from 1 to 8.
Area
Static
: Assigns bit rates to improve quality
automatically by camera to the set area. Adjust the
position and size in the preview screen. It can be set
up to all 8 positions.
Dynamic
: Waits in the area until a moving object is
detected. After detecting a moving object in the area,
assigns bit rates to the area with the moving object
automatically. Adjust the position and size in the
preview screen. 1 to 4 can be set.
Note
To select the
Dynamic
, perform the motion detection
settings in advance.
Off
: Doesn’t allocate the bit rate. It can be set up to all 8
positions.
