Sony HDV HVR-Z7E, Service Manual, Page: 294 / 507

6-110
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
3-28. Relay Gear, Conversion Gear
Key Points
in Re-assembling
Points to be noted
Points to be noted
Apply grease
Apply grease
Belt
2
Washer
4
Relay gear
3
Conversion gear
Relay gear
shaft
Relay gear
shaft
Apply grease
Apply
grease
Conversion
gear shaft
Apply grease when installing
Amount of grease: A ball of
grease of 1.0 mm diameter
Apply grease when installing
Amount of grease: A ball of
grease of 0.5 mm diameter
Conversion
gear shaft
Confirm that the belt doesn't run on the capstan motor block.
Check that the belt has no twisting, dirt, scratches, or grease
splashes when installed.
Confirm that the belt does
not run on the capstan
motor block.
Ensure that belt
has no twisting.
1
Belt
Don’t re-use the washer.
Points
to be noted
1. Removal procedure
1) Remove the belt
1
from the conversion gear.
2) Remove the washer
2
from the conversion gear shaft.
3) Remove the conversion gear
3
.
4) Remove the relay gear
4
.
2. Attachment procedure
1) Apply grease on the relay gear shaft.
Amount of grease: A ball of grease of 0.5 mm diameter.
2) Install the relay gear
4
in the relay gear shaft.
3) Apply grease on the conversion gear shaft.
Amount of grease: A ball of grease of 1.0 mm diameter.
4) Install the conversion gear
3
in the relay gear shaft.
5) Install the washer
2
in the conversion gear shaft (Don’t re-
use the washer)
6) Hook the belt
1
on the conversion gear and install it while
rotating the conversion gear.