Sony HDV HVR-Z7E, Service Manual, Page: 251 / 507

6-67
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
2. Flange Back Check (Set)
2-1. Flange Back Check (ND1)
(Using the flange back adjustment jig)
Subject Flange back adjustment jig
(Siemens star chart)
(Illuminance: 250
±
50 lux)
Measurement Point Check operation on monitor TV
Measuring Instrument (Note 2)
Specified value Focused at the TELE end and WIDE
end
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Check with the monitor larger than 40 inches.
Switch setting
1) POWER ......................................................... CAMERA mode
2) ND FILTER ............................................................................ 1
3) REC FORMAT (Menu setting) ............................. HDV1080i
Preparations before adjustments:
1) Install the flange back adjustment jig so that the distance be-
tween it and the front of lens of camera is less than 3 cm.
2) With the IRIS fully opened, adjust the illuminance of the chart
surface appropriately. (250
±
50 lux)
3) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respec-
tively.
Checking method:
Order Page Address Data Procedure
1 Set the ND FILTER to “1”.
2 0 01 01
3 6 99 Check the data is “00”.”
4 0 10 01
5
6
40 01
(16)
6 0 10 00
7 6 41 01
8 6 4D 40
9 6 61 01
10 Wait for 3 seconds.
11 6 01 13 Press PAUSE (Write) button.
12 0 10 01
13
6
01 13 Press PAUSE (Write) button.
(16)
14 Wait for 1 second.
15
6
2C 02
(16)
16
Check that the lens is
focused while zooming from
TELE end to WIDE end.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1
6
01 00 Press PAUSE (Write) button.
(16)
2
6
2C 00
(16)
3
6
40 00
(16)
4 0 10 00
5 6 01 00 Press PAUSE (Write) button.
6 6 61 00
7 6 41 00
8 6 4D 00
9 0 01 00
Ver. 1.5 2009.02