Sony HDV HVR-Z7E, Service Manual, Page: 209 / 507

6-25
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
27. CB Page table
Note 1:
If reading/writing data on pages CB, set data: 0C to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages CB can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to DF Fixed data-1 (Initialized data)
28. CC Page table
Note 1:
If reading/writing data on pages CC, set data: 0C to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF Fixed data-1 (Initialized data)
29. CD Page table
Note 1:
If reading/writing data on pages CD, set data: 0C to page:
0, address: 10, and then select pages: D. By this data
setting, the pages CD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF Fixed data-1 (Initialized data)
30. CE Page table
Note 1:
If reading/writing data on pages CE, set data: 0C to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages CE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF Fixed data-1 (Initialized data)
31. CF Page table
Note 1:
If reading/writing data on pages CF, set data: 0C to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages CF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF Fixed data-1 (Initialized data)