Sony HD1000P Operating Manual Download

Page: 23 / 120

Ge
tt

rte

Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.

Notes

• All times measured under the following

conditions:
Top: When the LCD turns on.
Bottom: Recording with the viewfinder while
the LCD turns off.

• You cannot turn off the viewfinder.

Playing time

Approximate time (min.) available when
you use a fully charged battery pack.

On the battery pack

• Before changing the battery pack, slide the

POWER switch to OFF (CHG).

• The CHG (charge) lamp flashes during

charging, or Battery Info (p. 22) will not be
correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (for Battery Info

only).

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the

power cord (mains lead) is disconnected from
the wall outlet (wall socket).

On the charging/recording/playback time

• Times measured with the camcorder at 25 °C

(77 °F) (10 to 30 °C (50 °F to 86 °F) is
recommended).

• The recording and playback time will be shorter

when you use your camcorder in low
temperatures.

• The recording and playback time will be shorter

depending on the conditions under which you
use your camcorder.

On the AC Adaptor

• Use the nearby wall outlet when using the AC

Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

• Even if your camcorder is turned off, AC power

(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.

NP-F970

580

605

310

340

630

660

340

375

Battery pack

LCD panel
on

LCD panel
off

Recorded
Format

HDV

NP-F570
(supplied)

260

280

295

315

NP-F770

540

570

605

650

NP-F970

780

830

890

950

Battery pack

Continuous
recording
time

Typical
recording
time*

Recording
Format

HDV

Summary of Contents for HD1000P

























































































































Search results

Summary of Contents for HD1000P

Reviews:

Related manuals for HD1000P

Brands by name

Popular brands

Sony HD1000P, Operating Manual

Search results

Summary of Contents for HD1000P

Reviews:

Related manuals for HD1000P

Brands by name

Popular brands