Sony HD1000P, Operating Manual

Page: 86 / 120

86
• There is a blank section between recorded
sections of the tape. This is not a
malfunction.
[COLOR SLOW S] does not operate
correctly.
• [COLOR SLOW S] may not operate
correctly in total darkness. Use NightShot
or [SUPER NS].
You cannot use [SUPER NS].
• The NIGHTSHOT switch is not set to ON
(p. 31).
The auto focus does not function.
• Set [FOCUS] to [AUTO] (p. 48).
• The recording conditions are not suitable
for auto focus. Adjust the focus manually
(p. 48).
[STEADYSHOT] does not function.
• Set [STEADYSHOT] to [ON] (p. 50).
Tiny spots in white, red, blue, or
green appear on the screen.
• The spots appear when the shutter speed is
slow or when you are recording in [SUPER
NS] or [COLOR SLOW S]. This is not a
malfunction.
The subjects passing fast by the
frame might appear crooked.
• This is called the focal plane phenomenon.
This is not a malfunction. Because of the
way the image device (CMOS sensor) reads
out image signals, the subjects passing by
the lens rapidly might appear crooked
depending on the recording conditions.
The color of the picture is not
correctly displayed.
• Deactivate the NightShot function (p. 31).
The screen picture is bright, and the
subject does not appear on the
screen.
• Set the NIGHTSHOT switch (p. 31) to
OFF, or cancel the BACK LIGHT function
(p. 32).
Horizontal bands appear.
• This may occur when recording pictures
under lighting from a discharge tube, such
as a fluorescent lamp, sodium lamp, or
mercury lamp. This is not a malfunction.
• This may be alleviated by adjusting the
shutter speed (p. 47).
Black bands appear when you
record a TV screen or computer
screen.
• Adjust [SHUTTR SPEED] (p. 47).
Refer also to “Cassette tapes/“Memory
Stick Duo”” section (p. 84).
You cannot play back a tape.
• Slide the POWER switch to PLAY/EDIT.
• Rewind the tape (p. 33).
You cannot play back in reverse
direction.
• Reverse playback is not possible with the
tape recorded in the HDV format.
Image data stored on a “Memory
Stick Duo” cannot be played back.
• Image data cannot be played back if you
have modified file names or folders, or
have edited the data on a computer (In this
case, the file name flashes). This is not a
malfunction (p. 97).
Playback
Troubleshooting (Continued)