Sony Handycam Vision CCD-TRV66E, Service Manual

Page: 99 / 166

5-17
8. MAX GAIN Adjustment
Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
Subject Clear chart
(Color reproduction adjustment frame)
Measurement Point DDS display of LCD or TV monitor
Measuring Instrument (Note)
Adjustment Page F
Adjustment Address 49
Specified Value C0 to FF
Note: The right two digits of the DDS display data is the object data.
00 00 XX
Object data
Switch setting:
1)
NIGHT SHOT .................................................................. OFF
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) ..................................... OFF
4) VIDEO LIGHT (CCD-TRV66E) ..................................... OFF
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 11, set data: 02, and press the PAUSE
button of the adjustment remote commander.
3) Select of page: 0, address: 03, and set data: 01.
4) Select page: 6, address: 56, and set data: 40.
5) Select page: 6, address: 01, set data: 19, and press the PAUSE
button of the adjustment remote commander.
6) Select page: F, address: 49, set data: 08, and press the PAUSE
button.
7) Check that the DDS display data (Note) lies within the specified
value.
Processing after Completing Adjustments
1)
Select page: D, address: 11, set data: 00, and press the PAUSE
button of the adjustment remote commander.
2) Select page: 0, address: 01, and set data: 00.
3) Select page: 0, address: 03, and set data: 00.
4) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
5) Select page: 6, address: 56, and set data: 00.
9. Auto White Balance Standard Data Input
Subject Clear chart
(Color reproduction adjustment frame)
Adjustment Page F
Adjustment Address 32 to 35
Note 1: This adjustment should be carried out upon completion of “6. Color
Reproduction Adjustment”.
Note 2: Check that the data of page: 6, address: 02 is “00”. If not, select
page: 6, address: 01, set data: 00, and press the PAUSE button of
the adjustment remote commander.
Switch setting:
1)
NIGHT SHOT .................................................................. OFF
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) ..................................... OFF
4) VIDEO LIGHT (CCD-TRV66E) ..................................... OFF
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Wait for 2 seconds.
3) Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.
4) Select page: 6, address: 01, set data: 0D, and press the PAUSE
button.
(When the standard data is take in, the data will be automatically
input to page: F, address: 32 to 35.)
5) Select page: 6, address: 02, and check that the data is “01”.
6) Perform “Auto White Balance Adjustment”.
Processing after Completing Adjustments
1)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjustment remote commander.
2) Select page: 0, address: 01, and set data: 00.