background image

SANYO Electric Co., Ltd.

Printed in China

1AC6P1P3382--
L5CU2/XE, US (1108KP-HS)

VCC-WD8875P
VCC-WD8874

Français

English

INSTRUCTION MANUAL

Scanning system

VCC-WD8875P:

PAL standard 625 lines, 50 fields/sec.

VCC-WD8874:

NTSC standard 525 lines, 60 fields/sec.

Image sensor

: 1/3” progressive CMOS

Number of effective pixels : 800 (H) x 600 (V)

Horizontal resolution

: 550 TV lines typical

Minimum illumination

: Gain high: 0.8 lx (F1.2, color mode)

0.08 lx (F1.2, B/W mode)

Video output

: 1.0 V(p-p)/75 

, composite, BNC

Video S/N ratio

: More than 48 dB (AGC off: More than 50 dB)

Light control

: Optical auto iris lens/Electronic iris (indoor use) 

Auto iris lens drive

: DC

Lens mount

: CS mount

Flange back

: 12.5 mm ± 0.5 mm / 0.5 in. ± 0.02 in. adjustment

Menu

: On screen display

Wide dynamic range

: ON (65 dB typical)/OFF

Backlight compensation

: OFF/ON (Center zone metering)

White balance

: ATW/Manual

Gain control

: Normal/High/OFF

Electronic shutter

VCC-WD8875P:

1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.

VCC-WD8874:

1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.

Aperture compensation

: Normal/High/Low/OFF

Day/Night

: Auto / Color / B/W

Sync system

: Internal sync/Line lock

Camera title

: OFF/ON, Up to 16 characters, adjustable title position

Digital noise reduction

: ON (1, 2)/OFF

Operating environment

: Temperature: -10°C - +50°C (14°F - 122°F)

Humidity: less than 90 % RH (no condensation)

Power supply

VCC-WD8875P:

 24 V AC ±10%, 50 Hz/ 12 - 15 V DC

VCC-WD8874:

 24 V AC ±10%, 60 Hz/ 12 - 15 V DC

Power consumption

: Approx. 6.9 W (with auto-iris lens)

Weight

: Approx. 330 g (11.6 oz.) (without lens)

Appearance and specifications are subject to change without prior notice 
or obligations.

71 (2.8)

45 (1.8)

11 (0.4)

119.5 (4.7)

1

(0.04)

129 (5.1)

1/4"-20UNC

Unit: mm (inch)

b

DIMENSIONS

b

Flange-back adjustment

This normally does not need adjustment. If the picture is out of focus at 
the telephoto position, adjust the flange-back position as described 
below.

1

Loosen.

2

Set to the maximum telephoto position and focus the picture.

3

Set to the maximum wide-angle position and focus the picture.

• Repeat steps 

2

 and 

3

 until the image stays in-focus when changing 

from a wide-angle position to a telephoto position.

4

Tighten.

3

1 4

2

In case of a problem

Do not use the unit if smoke or a strange odor comes from the unit, 
or if it seems not to function correctly. Turn off the power 
immediately and disconnect the power cord, and then consult your 
dealer or an Authorized Sanyo Service Center.

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage 
to the unit. For repairs, consult your dealer or an Authorized Sanyo 
Service Center.

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside 
the unit. If used with a foreign object inside, it could cause a fire, a 
short-circuit or damage. Be careful to protect the unit from rain, sea 
water, etc. If water or liquid gets inside the unit, turn off the power 
immediately and disconnect the power cord, and then consult your 
dealer or an Authorized Sanyo Service Center. 

Be careful when handling the unit 

To prevent damage, do not drop the unit or subject it to strong shock 
or vibration. 

Do not install this unit close to magnetic fields

The magnetic fields may result in unstable operation.

Protect from humidity and dust 

To prevent damage, do not install the unit where there is greasy 
smoke or steam, where the humidity may get too high, or where 
there is a lot of dust.

Protect from high temperatures 

Do not install close to stoves, or other heat sources, such as 
spotlights, etc., or where it could be subject to direct sunlight, as this 
could cause deformation, discoloration or other damages. 

Be careful when installing close to the ceiling, in a kitchen or boiler 
room, as the temperature may rise to high levels. 

Cleaning 

• Dirt can be removed from the cabinet by wiping it with a soft cloth. 

To remove stains, wipe with a soft cloth moistened with a soft 
detergent solution and wrung dry, then dry by wiping with a soft 
cloth.

• Do not use benzine, thinner or other chemical products on the 

cabinet, as this may cause deformation and paint peeling. Before 
using a chemical cloth, make sure to read all accompanying 
instructions. Make sure that no plastic or rubber material comes 
into contact with the cabinet for a long period of time, as this may 
cause damage or paint peeling.

The camera is a precision instrument. Handle it carefully and always 
follow the safety precautions. If the camera requires service, never 
try to repair it yourself or open the casing.

For servicing, maintenance, or repairs, consult your dealer or an 
Authorized Sanyo Service Center.

For US and Canadian Users

Safety Guard

This installation should be made by a qualified service person and should 
conform to all local codes.

For EU Users

For Russian Users

This product is certified by an official certification 

company which is authorized by the Russian Federation.

ДЛЯ

 

ПОЛЬЗОВАТЕЛЕЙ

 

РОССИЯ

Данная

 

продукция

 

сертифицирована

 

официальным

 

органом

 

по

 

сертификации

 

Российской

 

Федерации

.

SERVICE

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT 
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE 
LITERATURE ACCOMPANYING THIS UNIT.

WARNING:
TO REDUCE A RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For the customers in Canada

This Class B digital apparatus complies with Canadian ICES/NBM-003.

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
Changes or modifications not expressly approved by 

Sanyo

 may void the user's 

authority to operate this camera.

Please note:

Your SANYO product is designed and manufactured 
with high quality materials and components which 
can be recycled and reused.
This symbol means that electrical and electronic 
equipment, at their end-of-life, should be disposed 
of separately from your household waste.
Please dispose of this equipment at your local 
community waste collection/recycling centre.
In the European Union there are separate collection 
systems for used electrical and electronic products.
Please help us to conserve the environment we live 
in!

This symbol mark and recycle system are 
applied only to EU countries and not applied 
to countries in other areas of the world.

SANYO FISHER Sales (Europe) GmbH

Stahlgruberring 4, D-81829 München, Germany

SANYO Electric Co., Ltd.

1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan

About this manual

• Before installing and using the camera, please read this manual carefully. 

Be sure to keep it handy for later reference.

• This manual covers two models. Any difference between the two models is 

indicated when necessary.

b

Lens attachment

The camera has a mount for the CS mount lens.

Depending on the type of the lens, the shape of the lens plug may differ. In 
this case, consult your dealer or an Authorized Sanyo Service Center.

iridix technology is provided by Apical Limited, UK.

b

Camera attachment

Install the camera in a correct location so that the intended object 
can be monitored properly.

You should also adjust on the monitor side.

• Depending on the conditions of use, installation and 

environment, please be sure to make the appropriate settings 
and adjustments. If you need help with installation and/or 
settings, please consult your dealer or an Authorized Sanyo 
Service Center.

• If you want to use a commercially available platform for the 

camera, select an appropriate type, taking into consideration the 
gross weight of the camera and platform, and secure it on a firm 
place.

• Images may blur under extremely bright lighting; adjust the 

lighting angle to get clear images.

PREPARATION

Brake coil (+)

Drive coil (–)

Brake coil (–)

Drive coil (+)

LENS terminal for auto iris lens

Apply adapter ring (sold separately) when you use 
any C mount lens.

5 mm/0.2 in. max.

B

A

B

A

A

Bracket screws (longer)

B

Camera screws (shorter)

Wide Dynamic Range Camera

SPECIFICATIONS

PRECAUTIONS

L5CU2_XE_US(VCC-WD8875P_WD8874)(GB).fm  1 ページ  2008年11月12日 水曜日 午前10時14分

Reviews: