Adjusting the Audio Level
59
Chap
ter
3
Ad
jus
tme
nt
s an
d Set
tings
When you slide the focus ring forward, and set the
FOCUS switch to A (auto), the focus mode
becomes AF mode, in which auto focus is always
active.
The distance indications on the ring are invalid in
AF mode.
Focusing in AF mode
In AF mode, the camcorder monitors the video
for changes, and starts auto focus whenever it
detects a change. Auto focusing ends when the
subject is in focus, but the auto focus function
remains on standby.
In AF mode, you can also start auto focusing by
pressing the PUSH AF button or by turning the
focus ring.
When the focus mode is MF or AF, you can set
the MACRO switch to the ON side to enable
macro mode. Macro mode allows you to focus
over the range that includes the macro area.
Macro mode is disabled in Full MF mode.
When you set the AUDIO SELECT switch to
AUTO, the input levels of analog audio signals
recorded on each channel are adjusted
automatically. You can also make manual
adjustments.
Note
Even if you set the AUDIO SELECT switch to AUTO,
the input levels of digital audio signals are not adjusted
automatically.
Target audio level for manual audio level
adjustment
Make adjustment using –20 dB as the target level.
If the audio level meter shows a maximum level
of 0 dB, then it indicates that the input audio level
is excessive.
1
To adjust the signal input to the AUDIO
IN CH1 or CH2 connector, set the
AUDIO IN CH-1 or CH-2 switch to
REAR.
To adjust both input signals, set both
switches to REAR.
Adjusting in AF Mode
Using Macro Mode
Adjusting the Audio
Level
Manually Adjusting the Audio
Levels of the Audio Inputs from
the AUDIO IN CH-1/CH-2
Connectors
Target input level
Excessive input level
