Assigning Functions to Assignable Switches
141
Ch
apt
er 6 Men
u and
Det
ail
ed Set
tings
a) When the digital extender function is turned on, it is
not possible to show the return video.
a) When the digital extender function is turned on, it is
not possible to show the return video.
Electrical CC
Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance
adjustment values.
Each press of the switch or button switches in the order
3200K
t
4300K
t
5600K
t
6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
Note
This function is not available when White Filter >ND
Filter C.Temp in the Maintenance menu is set to On.
If you set ND Filter C.Temp to On after assigning the
function, the assignable switch ceases to function.
Setting retained
CC5600K
Apply a 5600K electrical CC filter to white balance
adjustment values.
Setting retained
Digital Extender
a)
Turn the screen magnification function on or off Turn the
screen magnification function on or off when the optional
CBK-CE01 50 Pin Interface and Digital Extender is
installed.
Setting not retained
Assignable switch setting Function
State when camcorder
is next powered on
Functions That Can Be Assigned to the RET Button on the Lens
Assignable switch setting Function
State when camcorder
is next powered on
Off
No assignment
—
Lens RET
Display return video signals when the optional CBK-
CE01 is installed and a camera extension unit is
connected.
When a camera extension unit is not connected, function
as follows.
During recording or playback:
Write a shot mark.
In the other states:
Conduct a recording review (if
playback is allowed).
—
Return Video
a)
Display return video signals when the optional CBK-
CE01 is installed and a camera extension unit is
connected.
—
Rec Review
Execute recording review.
—
Shot Mark1
Write Shot Mark1.
—
Shot Mark2
Write Shot Mark2.
—
OK Mark
Add or delete an OK mark.
—
Focus Mag
Turn the focus magnification function on or off.
Setting not retained
