Preparing the Audio Input System
44
Cha
pte
r 2
P
rep
ar
at
ions
8
Repeat steps
4
to
7
until the chart stays
in focus all the way from wide angle to
telephoto.
9
Tighten the F.f or F.B ring fixing
screws.
Attach the supplied microphone to the
microphone holder of the supplied viewfinder.
1
Loosen the screw (
1
) and open the
microphone holder clamp (
2
).
2
Place the microphone in the
microphone holder.
1
Place the microphone in the holder so
that “UP” is at the top.
2
Close the microphone holder.
3
Tighten the screw.
3
Plug the microphone cable into the MIC
IN connector, then set the AUDIO IN
CH1/CH2/CH3/CH4 switch for the
Preparing the Audio
Input System
Connecting a Microphone to the
MIC IN Connector
Microphone holder clamp
