Sony Handycam DCR-PC110 Operating Instructions Manual Download

Page: 20 / 168

Indicators displayed in the recording mode

The indicators are not recorded on tapes.

Recording a picture

Remaining battery time indicator

The remaining battery time indicator roughly indicates the recording time. The indicator may

not be correct, depending on the conditions in which you are recording. When you close the

LCD panel and open it again, it takes about one minute for the correct remaining battery time

in minutes to be displayed.

Time code

The time code indicates the recording or playback time, “0:00:00” (hours : minutes :

seconds) in CAMERA mode and “0:00:00:00” (hours : minutes : seconds : frames) in VCR

mode. You cannot rewrite only the time code.

Remaining tape indicator

The indicator may not be displayed accurately depending on the tape.

Shooting backlit subjects – BACK LIGHT

When you shoot a subject with the light source behind the subject or a subject with a light

background, use the backlight function.

In CAMERA or MEMORY mode, press BACK LIGHT.

The

indicator appears in the viewfinder or on the LCD screen.

To cancel, press BACK LIGHT again.

If you press EXPOSURE when shooting backlit subjects

The backlight function will be canceled.

BACK LIGHT

Recording mode indicator

Cassette memory indicator

This appears when using a tape with cassette memory.

Time indicator

The time is displayed about 5 seconds after the power is
turned on.

Date indicator

The date is displayed about 5 seconds after the power is
turned on.

STBY/REC indicator

Remaining battery time indicator

Time code/Tape counter indicator

Remaining tape indicator

This appears after you insert a cassette and record or
play back for a while.

0:00:01

45min

min

REC

JUL 4 2000

12:05:56 AM

Summary of Contents for Handycam DCR-PC110









































































































































































Search results

Summary of Contents for Handycam DCR-PC110

Reviews:

Related manuals for Handycam DCR-PC110

Brands by name

Popular brands

Sony Handycam DCR-PC110, Operating Instructions Manual

Search results

Summary of Contents for Handycam DCR-PC110

Reviews:

Related manuals for Handycam DCR-PC110

Brands by name

Popular brands