153
Additional Information
Maintenance information
Cleaning the video head
To ensure normal recording and clear pictures, clean the video heads. The video head
may be dirty when:
•mosaic-pattern noise appears on the playback picture.
•playback pictures do not move.
•playback pictures do not appear.
•the
x
indicator and “
CLEANING CASSETTE” message appear one after another
or the
x
indicator flashes on the LCD screen or in the viewfinder.
If the above problem,
[
a
]
or
[
b
]
occurs, clean the video heads for 10 seconds with the
Sony DVM-12CLD cleaning cassette (not supplied). Check the picture and if the above
problem persists, repeat cleaning.
Cleaning the LCD screen
If fingerprints or dust make the LCD screen dirty, we recommend using a LCD
Cleaning Kit (not supplied) to clean the LCD screen.
Charging the manganese-lithium battery in your camcorder
Your camcorder is supplied with a manganese-lithium battery installed so as to retain
the date and time, etc., regardless of the setting of the POWER switch. The manganese-
lithium battery is always charged as long as you are using your camcorder. The battery,
however, will get discharged gradually if you do not use your camcorder. It will be
completely discharged in about 3 months if you do not use your camcorder at all. Even
if the manganese-lithium battery is not charged, it will not affect the camcorder
operation. To retain the date and time, etc., charge the battery if the battery is
discharged.
Charging the manganese-lithium battery:
•Connect your camcorder to house current using the AC power adaptor supplied with
your camcorder, and leave your camcorder with the POWER switch turned off for
more than 24 hours.
•Or install the fully charged battery pack in your camcorder, and leave your camcorder
with the POWER switch turned off for more than 24 hours.
Maintenance information and precautions
[a]
[b]
or
Summary of Contents for Handycam DCR-PC110
Page 168: ...Sony Corporation Printed in Japan ...
