![background image](http://html.mh-extra.com/html/sony/h-ear-go-srs-hg1/h-ear-go-srs-hg1_help-manual_420573063.webp)
Personal Audio System
h.ear go (SRS-HG1)
Connecting to a Wi-Fi network using SongPal (iPhone/iPod touch)
You can connect the speaker to a Wi-Fi network using SongPal installed on your iPhone/iPod touch. First, make a BLUETOOTH
connection between the speaker and the iPhone/iPod touch. Then configure the Wi-Fi network settings. Wi-Fi network settings in
SongPal are sent from your iPhone/iPod touch to the speaker via BLUETOOTH.
Complete step
within 15 minutes after turning on the speaker. If the speaker is not operated for more than 15 minutes, the
speaker enters the standby mode automatically by the auto standby mode.
Do the following before starting.
Place the speaker closer to the wireless router.
Before starting this procedure, be aware that the setting information of your Wi-Fi network will not be protected until the setting is
complete. After the setting is complete, the setting information of your Wi-Fi network will be protected again when you set wireless
LAN security.
The specification and design of the application may change without notice.
Connect your iPhone/iPod touch to your wireless router.
Connect it to 2.4 GHz band (11b, 11g, and 11n) or 5 GHz band (11a and 11n). The speaker does not support IEEE
802.11ac.
1
Search for SongPal at the App Store and download it on to your iPhone/iPod touch.
SongPal
2
47
Summary of Contents for H.ear go SRS-HG1
Page 43: ...Help Guide Personal Audio System h ear go SRS HG1 Parts and controls Top and bottom Rear 27 ...
Page 149: ...Select Network 3 Select Connections and then select the icon with Connected using or 4 133 ...
Page 201: ...Related Topic Trademarks 4 589 712 11 2 Copyright 2016 Sony Corporation 185 ...