![background image](http://html.mh-extra.com/html/sony/h-ear-go-srs-hg1/h-ear-go-srs-hg1_help-manual_420573130.webp)
Hint
The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the PC.
You can perform pairing or connect to another BLUETOOTH device even when a BLUETOOTH connection is established. In this case, the
previous connection will be disconnected.
SongPal has no function of play music via a BLUETOOTH connection. Play music with your BLUETOOTH device such as smartphone, PC, etc.
If your PC does not have the BLUETOOTH function, it will be necessary to connect a commercially available BLUETOOTH adaptor to the PC.
Note
Stop playback on the BLUETOOTH device and turn down the volume of the device beforehand. When pairing is completed, loud sound may output
from the speaker. Otherwise, you may experience sudden loud sound from the speaker when music is played back for the first time after pairing.
The pairing mode of the speaker is released after about 5 minutes and the BLUETOOTH indicator flashes slowly. However, when pairing
information is not stored in the speaker, or you turn on the speaker for the first time after purchase, pairing mode is not released. If the pairing
mode is released before finishing the process, repeat from step
.
Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 9 devices and another device is to be paired.
The speaker can be paired with up to 9 devices. If a new device is paired after 9 devices have already been paired, the paired device with the
oldest connection time is replaced by the new one.
The pairing information with the speaker has been deleted from the BLUETOOTH device.
The speaker is initialized.
All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your iPhone/iPod touch or PC. In this case,
erase the pairing information of the speaker on your iPhone/iPod touch or PC, and then perform the pairing procedure again.
The speaker can be paired with multiple devices, but can only play music from one paired device at a time.
The passkey of this speaker is "0000." If a passkey besides "0000" is set on the BLUETOOTH device, pairing cannot be done with the speaker.
Check that the BLUETOOTH indicator on the speaker changes from flashing to staying lit.
When the BLUETOOTH connection is established, the BLUETOOTH indicator stays lit. You can enjoy the music playback
from your PC.
5
114
Summary of Contents for H.ear go SRS-HG1
Page 43: ...Help Guide Personal Audio System h ear go SRS HG1 Parts and controls Top and bottom Rear 27 ...
Page 149: ...Select Network 3 Select Connections and then select the icon with Connected using or 4 133 ...
Page 201: ...Related Topic Trademarks 4 589 712 11 2 Copyright 2016 Sony Corporation 185 ...