![background image](http://html.mh-extra.com/html/sony/h-ear-go-srs-hg1/h-ear-go-srs-hg1_help-manual_420573264.webp)
Personal Audio System
h.ear go (SRS-HG1)
Initializing the speaker
With the speaker turned on, press and hold the (power)/
PAIRING button and the - (volume) button at the same time for
more than four seconds.
The (power) indicator flashes quickly in green for two seconds. The settings of the speaker return to their factory defaults, and
network information and all BLUETOOTH device registration (pairing) information are deleted. Then, the speaker enters the start-
up mode automatically. It takes about 15 to 30 seconds to turn on the speaker. When the (power) indicator lights up in red
(standby mode), you can turn on the speaker.
Note
If you initialize the speaker, it may not be able to make a BLUETOOTH connection with your iPhone/iPod touch or PC. In this case, erase the
pairing information of the speaker on your iPhone/iPod touch or PC, and then perform the pairing procedure again.
4-589-712-11(2) Copyright 2016 Sony Corporation
248
Summary of Contents for H.ear go SRS-HG1
Page 43: ...Help Guide Personal Audio System h ear go SRS HG1 Parts and controls Top and bottom Rear 27 ...
Page 149: ...Select Network 3 Select Connections and then select the icon with Connected using or 4 133 ...
Page 201: ...Related Topic Trademarks 4 589 712 11 2 Copyright 2016 Sony Corporation 185 ...