NAS-E300HD.GB.4-115-698-
11
(1)
GB
Some tracks cannot be played.
If you are using a multisession disc with an audio CD
format, only tracks recorded in the first session can
be played.
MP3 tracks cannot be played.
MP3 files that do not conform with the ISO 9660
Level 1, 2, or Joliet standard are recorded on the disc.
Files without the MP3 extension cannot be played.
If a file on a disc is not an MP3 file but has an .MP3
extension, the unit tries to play that file and it may
cause noise in the sound or the unit to malfunction.
The files have the MP3 extension, but they are in a
format other than MPEG-1 Audio Layer 3.
Title information cannot be obtained.
A disc is not inserted.
The unit’s database does not contain any information
that corresponds with the disc. Try the Title Update
function using the “Title Updater” software (page
46).
FM/AM and DAB*
Radio broadcasts cannot be received or there is
severe hum or noise.
Connect the antennas correctly (pages 18 and 19).
Adjust the antenna position.
Use an external antenna.
Keep the antennas away from the speaker cords, the
power cord and the USB cable to avoid picking up
noise.
Turn off nearby electrical equipment.
When the FM broadcast is received in stereo, switch
the reception to monaural (page 38).
Consult your nearest Sony dealer if the supplied AM
antenna has come off the plastic stand.
RDS is not working.*
1
Make sure that you tune in an FM station.
*
1
For the European model only
DAB broadcast cannot be received.*
Check all aerial connections, then perform the DAB
Automatic Scan procedure (page 20).
The current DAB service is not available. Press
+/– (TUNE +/– on the main unit) to select a
different service.
If you have moved to another area, some services/
frequencies may have changed and you may not be
able to tune into your usual broadcast. Perform the
DAB Automatic Scan procedure to re-register the
contents of broadcast (page 20). (Performing this
procedure clears all previously stored presets.)
WM-PORT/USB
The “WALKMAN” is not recognized.
A USB device is connected to the (USB) port and
is importing audio data. Wait until the import has
completed.
If two “WALKMAN” models are connected to the
WM-PORT and the (USB) port, disconnect one of
them.
Reconnect the “WALKMAN”.
Connect the supported “WALKMAN” (page 78).
The “WALKMAN” does not work properly. Refer to
the operating manual of the “WALKMAN” for how
to deal with this problem. If the problem persists,
contact your nearest Sony dealer.
The USB device is not recognized.
If a “WALKMAN” is connected to the WM-PORT,
disconnect it.
Reconnect the USB device.
Connect the supported USB device (page 78).
The USB device does not work properly. Refer to the
operating manual of the USB device for how to deal
with this problem. If the problem persists, contact
your nearest Sony dealer.
* For the UK model only
