83
Settings
and Adjus
tments
• SUBWOOFER
Notes
• If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
• Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
• When you set the front speaker setting to
“SMALL,” you cannot set the centre and rear
speaker settings to “LARGE,” and the subwoofer
setting to “NONE.”
◆
DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (
A
). Then adjust the values in
“CENTER” (centre speaker
B
), “REAR”
(rear speaker
C
), and “SUBWOOFER” (
D
)
to reflect the actual distance to your centre
speaker, rear speakers, and subwoofer.
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
Notes
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• The minimum distance is 0.3 m.
◆
LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
YES
Select this if you connect a
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.
NONE
Select this if you do not connect
a subwoofer.
B
D
A
A
C
C
(0.3~9 m)
(0.3~9 m)
FRONT
(3 m)
Set this between 0.3 and
9 m in 0.3 m increments.
CENTER (3 m)
Set this within –1.5 m of the
“FRONT” setting in 0.3 m
increments. For example, if
“FRONT” is set to 6 m,
“CENTER” can be set
between 4.5 and 6 m.
REAR (3 m)
Set this within –4.5 m of the
“FRONT” setting in 0.3 m
increments. For example, if
“FRONT” is set to 6 m,
“REAR” can be set
between 1.5 and 6 m.
SUB WOOFER
(3 m)
Set this within –4.5 m of the
“FRONT” setting in 0.3 m
increments. For example, if
“FRONT” is set to 6 m,
“SUB WOOFER” can be
set between 1.5 and 6 m.
L (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
CENTER
(0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
SUBWOOFER
(0 dB)
Set this between –10 dB and
0 dB in 0.5 dB increments.
c
continued
