77
Settings
and Adjus
tments
◆
BLACK LEVEL
Selects the black level (setup level) for the
video (NTSC) signals output from the jacks
other than COMPONENT VIDEO OUT/
HDMI OUT jacks.
◆
BLACK LEVEL (COMPONENT OUT)
Selects the black level (setup level) for the
video (NTSC) signals output from the
COMPONENT VIDEO OUT jacks. You
cannot select this when the player outputs
progressive signals (page 77).
◆
COMPONENT OUT
Selects the type of signal output from the
COMPONENT VIDEO OUT jacks. See page
89 for more information about the two
different signal types.
When the setting is changed, the confirmation
display appears. If you do not select “Yes” or
“No” within about 10 seconds, the setting is
canceled and the display returns to the Setup
Display.
To force the system to switch to interlace
when “PROGRESSIVE” is selected
Hold down
x
on the player and press PLAY
on the player.
◆
4:3 OUTPUT
This setting is effective only when you set
“TV TYPE” in “SCREEN SETUP” to
“16:9.” If you can change the aspect ratio on
your progressive format (480p) compatible
TV, change the setting on your TV, not the
player.
Note that this setting is effective only for
HDMI connection, or progressive signals
output from the COMPONENT VIDEO OUT
jacks.
◆
LINE
Selects video signals output from the LINE
(RGB)-TV jack on the rear panel of the
player.
• If your TV does not accept S video or the RGB
signals, no picture will appear on the TV screen,
even if you select “S VIDEO” or “RGB.” Refer to
the instructions supplied with your TV.
• If your TV has only one SCART (EURO AV)
jack, do not select “S VIDEO.”
• When you select “RGB,” you cannot use the
COMPONENT VIDEO OUT jacks.
JACKET
PICTURE
The jacket picture (still picture)
appears, but only when the
jacket picture is already
recorded on the disc (DVD,
etc.). If the disc does not
contain a jacket picture, the
“GRAPHICS” picture appears.
GRAPHICS
A preset picture stored in the
player appears.
BLUE
The background colour is blue.
BLACK
The background colour is black.
OFF
Lowers the standard black
level. Use this when the picture
becomes too white.
ON
Sets the black level of the
output signal to the standard
level.
OFF
Sets the black level of the
output signal to the standard
level. Normally select this
position.
ON
Raises the standard black level.
Use this setting when the
picture appears too dark.
INTERLACE
Select this when the
player is connected to a
standard (interlace
format) TV.
PROGRESSIVE
Select this when you have
a TV that can accept
progressive signals.
FULL
Select this when you can change
the aspect ratio on your TV.
NORMAL
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left
and right sides of the image.
VIDEO
Outputs video signals.
S VIDEO
Outputs S video signals.
RGB
Outputs RGB signals.
16:9 aspect ratio TV
c
continued
