82
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the same
level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
25).
You can create two different Speaker Setup
settings, one for Super Audio CDs and one for
all other types of discs. When you use the
i.LINK connection, it is not available.
1
Follow steps 1 through 4 of “Using
the Setup Display” (page 74) to
select “SPEAKER SETUP” in the
Setup display.
2
Select “DVD” or “SUPER AUDIO
CD” using
X
/
x
, then press ENTER.
Example: when “DVD” is selected.
3
Set the following items in the
order that they are explained
below.
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.
◆
SIZE
Selects the size of the speakers.
• FRONT
• CENTER
• REAR
SPEAKER SETUP
SUPER AUDIO CD:
DVD:
SPEAKER SETUP (DVD)
DISTANCE:
LEVEL(FRONT)
:
LEVEL(REAR)
:
OFF
TEST TONE:
FRONT:
CENTER:
YES
LARGE
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press
ENTER
SETUP
DISPLAY
SIZE:
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE
Select this if you do not connect
a centre speaker.
LARGE
Normally select this position.
Select according to the rear
speakers position.
SMALL
Select this when the sound
distorts or the surround effects
are difficult to hear.
Select according to the rear
speaker position.
NONE
Select this if you do not connect
rear speakers.
