Sony DSR-DR1000P, Operating Instructions Manual

Page: 44 / 111

44
Playback
Connecting Multiple Units for Simultaneous Playback (Multi-Simultaneous
Playback)
You can connect multiple DSR-DR1000/DR1000P units
in a cascade connection for simultaneous playback of
various different scenes. The figure below shows how to
make cascade connection using the REMOTE IN(R)
connector and the REMOTE OUT(P) connector. In this case, the REMOTE I/F menu item (see page 74) must be
set to 9PIN(PARA).
To control all of the cascaded units from a single unit,
press the EXT button on the controlling unit, turning it on.
Set the control mode selectors on other units to REMOTE.
High-Speed and Low-Speed Search
—Quickly and Accurately
Determining Editing Points
Use the search function to easily locate the desired scene
and to quickly and accurately determine edit points.
Searching with the NEXT and PREV
buttons
The PREV and NEXT buttons can be used alone to jump
to the start and end points of clips
(see page 48) .
To cue up a cue point
Press the PREV/NEXT button with the J (CUE) button
held down.
For more information on this operation, see “Cueing Up a
Desired Cue Point” on page 46
To search while viewing the video at fast speed
(PLAY + PREV/NEXT)
To search in the reverse direction, press the PREV button
with the PLAY button held down. (The both buttons light.)
To search in the forward direction, press the NEXT button
with the PLAY button held down. (The both buttons light.)
Searching with the search dial
You can use the search dial of this unit to perform the
following kinds of search playback.
Shuttle: Press the SEARCH button or search dial to select
shuttle mode (the SHUTTLE indicator lights).
Playback is carried out at a speed determined by the
rotation angle of the search dial.
SUPER
b)
b)
a) a) a) a)
REMOTE OUT(P) REMOTE OUT(P)
REMOTE
IN(R)
MONITOR SUPER MONITOR
Recorder 1
(controlling unit)
Monitor
Monitor
Recorder 2
Monitor
Recorder n
a) 75
Ω
coaxial cable
b) 9-pin remote control cable