19
Location and Function of Parts
• When COMPOSITE/S VIDEO is selected:
• When Y
–
R,B is selected:
AUDIO indicators:
Comprise the CH 1/2 indicator and
CH 3/4 indicator to indicate the channel selection for
analog audio output from the AUDIO OUT 1/3 and
AUDIO OUT 2/4 connectors.
You can change the channel selection with the AUDIO
OUTPUT menu item
b
INPUT signal display section
Indicates the input video and audio signal formats selected
with the INPUT SELECT buttons (i.LINK, VIDEO, CH1
1/2, and CH2 3/4 buttons).
i.LINK indicator:
Lights when the digital video and audio
signals in i.LINK-compatible DV format are selected.
VIDEO indicators:
The indicator (COMPOSITE, S
VIDEO, Y
−
R,B, SDI, or SG) corresponding to the
selected input video signal format lights.
AUDIO indicators:
Comprise the CH-1 1/2 indicator and
CH-2 3/4 indicator, under each of which there are four
more indicators (ANALOG, AES/EBU, SDI, and SG).
They indicate the selected input audio signal formats.
Note
The indicators blink if no signals are connected to the
selected video/audio input connectors.
c
Time data type indicators
One of the three indicators (COUNTER, U-BIT, or TC)
lights to indicate the type of time data currently shown in
the time counter display.
COUNTER:
Count value of the time counter
U-BIT:
User bit data
TC:
SMPTE time code (for DSR-DR1000) or EBU time
code (for DSR-DR1000P)
d
DVCAM indicator
This stays lit.
e
KEY INHI (key inhibit) indicator
Lights when the control mode selection switch is set to
KEY INHI.
f
REC INHI (recording inhibit) indicator
Lights when the REC INHIBIT menu item
is
set to ON.
g
Disk end alarm indicator
Starts flashing when the remaining capacity of the disk is
for about 2 minutes.
h
REPEAT (repeat playback) indicator
Lights when the REPEAT MODE menu item
is set to ON to enable the repeat playback function.
i
Time counter display
Indicates the count value of the time counter, time code,
VITC, or user bit data depending on the settings of the
Connectors
Output signals
Y/CPST
Composite signal
R
−
Y/S
−
C
S
−
C
B
−
Y/S
−
Y
S
−
Y
SUPER
Composite signal
Connectors
Output signals
Y/CPST
Y signal
R
−
Y/S
−
C
R
−
Y signal
B
−
Y/S
−
Y
B
−
Y signal
SUPER
Composite signal
Indicators
Functions
CH 1/2
Lights when channels 1 and 2 are
selected for analog audio output from
the AUDIO OUT 1/3 and AUDIO OUT
2/4 connectors
.
CH 3/4
Lights when channels 3 and 4 are
selected for analog audio output from
the AUDIO OUT 1/3 and AUDIO OUT
2/4 connectors
.
Indicators
Meanings
COMPOSITE
Composite video signal
S VIDEO
S-video (separated Y and C) signals
Y
−
R,B
Y, R
−
Y and B
−
Y component video
signals
SDI
SDI video signal
SG
Video test signal (factory default
setting)
Indicators
Functions
CH-1 1/2
(ANALOG, AES/
EBU, SDI, SG)
The indicator corresponding to the
signal format selected for audio input
to channel 1 (when in 2-channel
mode) or to channels 1 and 2 (when
in 4-channel mode) lights.
ANALOG:
Analog audio signal
AES/EBU:
Digital audio signal in
AES/EBU format
SDI:
SDI audio signal
SG:
Audio test signal (factory default
setting)
CH-2 3/4
(ANALOG, AES/
EBU, SDI, SG)
The indicator corresponding to the
signal format selected for audio input
to channel 2 (when in 2-channel
mode) or to channels 3 and 4 (when
in 4-channel mode) lights.
ANALOG:
Analog audio signal
AES/EBU:
Digital audio signal in
AES/EBU format
SDI:
SDI audio signal
SG:
Audio test signal (factory default
setting)
Summary of Contents for DSR-DR1000P
Page 10: ...10 ...
Page 28: ...28 Location and Function of Parts ...
