When inserting a memory card into a memory card adaptor, be sure that the
memory card is inserted in the correct direction and then insert it as far as it will
go. If the card is not inserted properly, it may result in a malfunction.
[279] How to Use
Precautions/This product
Cleaning this product
On cleaning
Cleaning the lens and flash
Wipe the lens and flash with a soft cloth to remove fingerprints, dust, etc.
Cleaning the lens
Do not use a cleaning solution containing organic solvents, such as thinner, or
benzine.
When cleaning the lens surface, remove dust with a commercially available
blower. In case of dust that sticks to the surface, wipe it off with a soft cloth or
tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral
pattern from the center to the outside. Do not spray lens cleaning solution
directly onto the lens surface.
Cleaning the flash
Clean the flash surface before use. The heat of the flash emission may cause dirt
on the flash surface to start smoking or burning. Wipe the flash surface with a soft
cloth to remove dirt or dust, etc.
Cleaning the product surface
Clean the product surface with a soft cloth slightly moistened with water, then wipe
the surface with a dry cloth. To prevent damage to the finish or casing:
Do not expose the product to chemical products such as thinner, benzine,
alcohol, disposable cloths, insect repellent, sunscreen or insecticide.
Do not touch the product with any of the above on your hand.
Do not leave the product in contact with rubber or vinyl for a long time.
Cleaning the monitor
