2. Hold the product so that the white area fully covers the AF area located in the
center, and then press
on the center of the control wheel.
The calibrated values (Color Temperature and Color Filter) are displayed.
3. Select a registration number using the right/left button.
The monitor returns to the recording information display while retaining the
memorized custom white balance setting.
Note
The message [Custom WB Error] indicates that the value is higher than the
expected range, when the flash is used on a subject with too bright colors in the
frame. If you register this value, the
indicator turns orange on the
recording information display. You can shoot at this point, but it is
recommended that you set the white balance again to get a more accurate
white balance value.
[112] How to Use
Using shooting functions
Selecting an effect mode
Picture Effect
Select the desired effect filter to achieve more impressive and artistic images.
1. MENU
→
(Camera Settings)
→
[Picture Effect]
→
desired setting.
Menu item details
Off:
Disables the [Picture Effect] function.
Toy Camera:
Creates a soft image with shaded corners and reduced sharpness.
Pop Color:
Creates a vivid look by emphasizing color tones.
Posterization:
Creates a high contrast, abstract look by heavily emphasizing primary colors, or in
black and white.
