[53] How to Use
Using shooting functions
Using the flash
Using flash
In dark environments, use the flash to light up the subject while shooting and to
prevent camera-shake. When shooting against the sun, use the flash to lighten the
image of the backlit subject.
1. Press the
(Flash pop-up) button to pop up the flash.
2. Press the shutter button fully down.
When you do not use the flash
When not using the flash, press it back into the camera body.
Note
If you fire the flash before the flash unit pops up entirely, it may cause
malfunction.
You cannot use the flash when recording movies.
While charging the flash,
flashes. After charging is completed, the flashing
icon will light up.
When an external flash (sold separately) is attached to the Multi Interface Shoe,
the state of the external flash has priority over the setting of the product. You
cannot use the product’s internal flash.
Before attaching/removing an accessory such as a flash to/from the Multi
Interface Shoe, turn off the product first.
When attaching an accessory, insert it fully to the Multi Interface Shoe and
