1. Set the mode dial to M (Manual Exposure).
2. Press the bottom button on the control button to select the shutter speed or aperture value,
then turn the control dial to select a value.
Check the exposure value at “MM” (metered manual).
:
Images become brighter.
Toward −
:
Images become darker.
0:
Appropriate exposure analyzed by the product
3. Adjust the focus and shoot the subject.
Note
[ISO AUTO] cannot be selected for [ISO] in manual exposure mode.
In manual exposure mode, the [ISO AUTO] setting under [ISO] is switched to the minimum
ISO sensitivity. Change the ISO value to your desired setting if necessary.
When the amount of ambient light exceeds the metering range of the Metered Manual, the
Metered Manual indicator flashes.
The
(SteadyShot warning) indicator does not appear in manual exposure mode.
The brightness of the image on the monitor may differ from the actual image being shot.
How to Use
Shooting
Selecting a shooting mode
Memory recall
Allows you to shoot an image after recalling often-used modes or camera settings registered in
advance.
1. Set the mode dial to 1 or 2 (Memory recall).
2. Press
on the center of the control button.
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings are
given priority and the original settings may become invalid. Check the indicators on the
screen before shooting.
44
