Sony DKR-700, Instructions For Use Manual, Page: 54 / 108

54(E)
Timing for Capturing an Image
Using a Foot Switch
If you capture an image using a foot switch, use the
DIP switch on the rear panel of the DKR-700/700P to
set capture timing. (See page 17(E).)
The following figures show which frame or field is
captured on the selected timing.
Capturing images in frame units
Select “Frame” for “ Frame/Field” in the Capture/Rec
Setup menu. (See page 41(E).)
a
b
a
b
a
b
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
Timing 1 (Switch 2: OFF, Switch 3: OFF)
Trigger
signal
Input video
signals
Frame captured into memory
Timing 2 (Switch 2: OFF, Switch 3: ON)
Trigger
signal
Input video
signals
Frame captured into memory
Timing 3 (Switch 2: ON, Switch 3: OFF)
Trigger
signal
Input video
signals
Frame captured into memory
a: 699 or 731
µ
s (DKR-700)
672 or 704
µ
s (DKR-700P)
b: 16.7 ms (DKR-700)
20.0 ms (DKR-700P)
Capturing images in field units
Select “Field” for “ Frame/Field” in the Capture/Rec
Setup menu. (See page 41(E).)
a
b
a
b
a
b
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
Timing 1 (Switch 2: OFF, Switch 3: OFF)
Trigger
signal
Input video
signals
Field captured into memory
Timing 2 (Switch 2: OFF, Switch 3: ON)
Trigger
signal
Input video
signals
Field captured into memory
Timing 3 (Switch 2: ON, Switch 3: OFF)
Trigger
signal
Input video
signals
Field captured into memory
a: 699 or 731
µ
s (DKR-700)
672 or 704
µ
s (DKR-700P)
b: 16.7 ms (DKR-700)
20.0 ms (DKR-700P)
Appendixes