U
si
n
g t
h
e
M
e
nu
Using the Menu
77
To cancel the slide show, touch [END]. To pause, touch [PAUSE].
z
Tip
• You can select the first picture for the slide show by touching
/
before touching
[START].
• If movies are played in the slide show, you can adjust the volume by touching
(decrease)/
(increase).
FRAME REC
You can record pictures with a stop-motion animated effect by alternately frame
recording and then moving the subject a little. Operate your camcorder using the
Remote Commander to prevent camera-shake.
b
Note
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
SMTH INT. REC
This function is useful to observe the movement of clouds or the changes of
daylight. Your camcorder will shoot 1 frame of the picture at a selected interval
and keep them in memory until it has stored several frames. Then those frames are
recorded on the tape at one time. These pictures appear smooth when played back.
Connect your camcorder to the wall outlet using the supplied AC Adaptor during
the operation.
a: Shooting time
b: Interval
1
Touch .
G
OFF
Select to record in the standard recording mode.
ON (
)
Select to record pictures using frame recording.
1
Select [ON], then touch
.
2
Touch .
3
Press REC START/STOP.
A picture (approximately 6 frames) is recorded, and your
camcorder enters the standby mode.
4
Move the subject and repeat step 3.
[b]
[b]
[a]
[a]
[a]
,
continued
