Sony DCR-PC350 - Digital Handycam Camcorder Operation Manual Download

Page: 5 / 152

Notes on handling the Handycam Station

• When attaching your camcorder to the Handycam

Station, insert your camcorder in the direction of the
arrow as shown in the following illustration. Be sure
to insert it all the way.

• When removing your camcorder from the

Handycam Station, hold both your camcorder and
the Handycam Station as shown in the following
illustration, and remove it from the Handycam
Station.

Note

• When disconnecting the AC Adaptor from the

Handycam Station, hold both the DC plug and the
Handycam Station and disconnect the AC Adaptor.

• Be sure to turn the power of your camcorder off

before inserting it into or removing it from the
Handycam Station.

• Your camcorder may not attach properly to the

Handycam Station if the camcorder’s DC IN jack
cover is open or the Strap Belt is caught between
your camcorder and the Handycam Station.

• Both the camcorder and the Handycam Station have

one A/V jack (for the A/V connecting cable) and one
S VIDEO jack (for the S video cable). Do not
connect the same cables to both your camcorder and
the Handycam Station. The image might be
distorted.

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

























































































































































Search results

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-PC350 - Digital Handycam Camcorder

Brands by name

Popular brands

Sony DCR-PC350 - Digital Handycam Camcorder, Operation Manual

Search results

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-PC350 - Digital Handycam Camcorder

Brands by name

Popular brands