Sony DCR-PC350 - Digital Handycam Camcorder Operation Manual Download

Page: 16 / 152

Getting started

Step 2: Charging the
battery pack

You can charge the battery by attaching the
“InfoLITHIUM” battery pack (F series) to
your camcorder.

Note

• You cannot use batteries other than the

“InfoLITHIUM” battery pack (F series) (p. 130).

• Do not short-circuit the DC plug of the AC Adaptor

or battery terminals with any metallic objects. This
may cause a malfunction.

• Use a nearby wall outlet when using the AC

Adaptor. Disconnect the AC Adaptor from the wall
outlet immediately if any malfunction occurs.

Attach the charged battery pack to the
camcorder.

Slide the BATT

(battery release)

lever in the direction of 1 and push it
down in the direction of 2.
Remove the battery terminal cover when
it lifts up in the direction of 3.

Attach the battery pack with its terminal
side facing your camcorder as shown in
the following illustration and press down
the battery pack until it clicks.

With the

mark on the DC plug facing

up, connect the AC Adaptor to the DC
IN jack on the Handycam Station.

Connect the power cord to the AC
Adaptor.

Connect the power cord to the wall
outlet.

To the wall outlet

DC plug

Power cord

AC Adaptor

DC IN jack

Handycam Station

BATT

(battery release) lever

mark

DC IN jack

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

























































































































































Search results

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-PC350 - Digital Handycam Camcorder

Brands by name

Popular brands

Sony DCR-PC350 - Digital Handycam Camcorder, Operation Manual

Search results

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-PC350 - Digital Handycam Camcorder

Brands by name

Popular brands