Sony DCR-PC115E, Operating Instructions Manual, Page: 224 / 268

224
English
Self-diagnosis display
Five-digit display Cause and/or Corrective Actions
• You are using a battery pack that is not an “InfoLITHIUM”
battery pack.
c Use an “InfoLITHIUM” battery pack (p. 22, 239).
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least
one hour to acclimatise (p. 244).
• The video heads are dirty.
c Clean the heads using the cleaning cassette (optional)
(p. 245).
• A malfunction other than the above that you can service has
occurred.
c
Remove the cassette and insert it again, then operate your
camcorder.
c Disconnect the mains lead of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer or local authorised Sony service
facility and inform them of the 5-digit code
(example: E:61:10).
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorised Sony service facility.
Your camcorder has a self-diagnosis display function.
This function displays the current condition of your
camcorder as a 5-digit code (a combination of a letter
and figures) on the screen. If a 5-digit code is
displayed, check the following code chart. The last
two digits (indicated by
ss ) will differ depending
on the state of your camcorder.
C:21: ss
LCD screen or Viewfinder
E:61: ss
E:62: ss
E:91: ss
C:31: ss
C:32: ss
C:04: ss
C:22: ss
Self-diagnosis display
• C: ss : ss
You can service your camcorder
yourself.
• E: ss : ss
Contact your Sony dealer or local
authorised Sony service facility.
C:21:00