Sony Cyber-shot PRO DSC-D700, Service Manual

Page: 112 / 116

4-24 DSC-D700 (UC,CE)
3. When the recorded picture of a PC card is not reproduced on the LCD monitor in
the PLAY mode
(The EE picture of a camera is normal in the CAM mode.)
4. When the recorded picture of a PC card is not reproduced on the LCD monitor in
the PLAY mode
(The EE picture of a camera is also not displayed in the CAM mode.)
.
Defective soldering of PC card connector CN703 on the
IF-717 board
NO
NO
YES
YES
. Defective operation of card I/F block
IC002 on SY-264 board
→
Replace the SY-264 board.
* The adjustment after board replacement
must be performed.
Are connectors on FP-10 board
firmly inserted into connectors on SY-264
and IF-717 boards?
Is operation normal
after replacement of
SY-264 board?
END
START
.
Insert the connectors again.
.
The connectors on the FP-10 board are not firmly inserted
into the connectors on the SY-264 and IF-717 boards, or
the connectors are defective.
NO
NO
YES
YES
. Defective operation of LCD drive circuit
IC702 on the IF-717 board
→
Replace the IF-717 board.
* The adjustment after board replacement
must be performed.
Is Y signal output at
emitter of Q403 on FM-63
board normal?
Is output signal at
video output pin normal?
END
START
. Defective operation of IC403 or IC402 on the FM-63
board
→
Replace the FM-63 board.
* The adjustment after board replacement must be
performed.