Sony Cyber-shot DSC-RX100M7, Help Manual

Page: 146 / 634

Help Guide
Digital Still Camera
DSC-RX100M7
Shutter Priority
You can express the movement of a moving subject in various ways by adjusting the shutter speed, for example, at the
instant of the movement with high speed shutter, or as a trailing image with low speed shutter.
Hint
Use a tripod to prevent camera-shake when you have selected a slow shutter speed.
When you shoot indoor sports scenes, set the ISO sensitivity to a higher value.
Note
The SteadyShot warning indicator does not appear in shutter speed priority mode.
When [ Long Exposure NR] is set to [On] and the shutter speed is 1/3 second(s) or longer with a [ Shutter Type] other
than [Electronic Shutter] is set, noise reduction after shooting is performed for the same amount of time that the shutter was
open. However, you cannot shoot any more while noise reduction is in progress.
The brightness of the image on the screen may differ from the actual image being shot.
Related Topic
Long Exposure NR (still image)
5-007-204-11(1) Copyright 2019 Sony Corporation
Set the mode dial to S (Shutter Priority).
1
Select the desired value by turning the control wheel.
If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks. If this
happens, change the shutter speed.
2
Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper exposure.
3
146